Checklist "Installation of window and door blocks"

This checklist walks you through preparing openings, accurately positioning and securely fixing window and door units with wedges and anchors, then testing and adjusting the hardware to ensure smooth operation, proper alignment, and airtight, long-lasting installation.

Step-by-step guide "Fixing window and door blocks"

This step-by-step guide explains how to securely fix window and door units by correctly positioning them in the openings, fastening them with anchors or mounting plates, sealing gaps with монтажная пена, and finally checking smooth operation and airtightness to ensure long-term stability, insulation, and reliable performance.

Checklist "Plaster or exterior wall cladding"

This checklist guides you through choosing between exterior plastering or cladding, properly preparing walls, and applying the finish to achieve a durable, weather-resistant facade that meets project and local regulatory requirements.

Step-by-step guide "Installing exterior slopes on windows and doors"

This step-by-step guide explains how to install exterior window and door reveals (slopes), covering surface preparation, profile setup, material selection, secure fixing, and final sealing to protect openings from moisture, drafts, and temperature changes.

Infographic "Cleaning of construction debris"

This step-by-step guide explains how to install exterior window and door reveals (slopes), covering surface preparation, profile setup, material selection, secure fixing, and final sealing to protect openings from moisture, drafts, and temperature changes.

Checklist "Preparation of interior spaces for finishing works"

This checklist provides a step-by-step guide to preparing interior spaces for finishing works, covering surface cleaning, defect repair, priming, and floor preparation to ensure durable, high-quality results.

Checklist for "Recording construction stages in a log"

This checklist explains how to accurately record each construction stage in a site log, including regular dated entries, supporting documents (acts, receipts, certificates, photos), and signed quality acceptances to ensure transparency and compliance with standards.

Step-by-step guide "Conducting intermediate acceptance"

This step-by-step guide explains how to carry out an interim acceptance of construction works, including inspection, defect identification, documentation, correction planning, and quality control to ensure compliance with design and building standards.

Checklist "Identification and elimination of defects before the next stage of construction"

This checklist outlines how to systematically inspect completed works, identify and document defects, test engineering systems, and ensure all issues are resolved before moving on to the next construction stage.